Cookie Img
Call : +919444017597 Call : +919444017848
Company Profile
Business Type Manufacturer , Supplier
Primary Competitive Advantages
  • More than 17 years of industry experience
  • Serving more than 400 customers all over India
  • Sophisticated Research & Development facility
  • State-of-the-art manufacturing unit
  • Complete customer satisfaction
  • Unparalleled technical & marketing service
  • Has a Pan India presence through its wide dealer network.

Year of Establishment 1993
Product Range
PROTECTAB EC-1
High speed Sodium Alginate based Aqueous coating system

PROTECTAB HP-1 (ORGANIC)
- HPMC based organic solvent (IPA- MDC) coating system

PROTECTAB HP-1 (HYDRO ALCOHOLIC)
- HPMC based hydro alcoholic(IPA-WATER) coating system

PROTECTAB HP-1 (AQUEOUS)
- HPMC based aqueous coating system   

PROTECTAB MB-1
Moisture Barrier Film Coating Material.

PROTECTAB EC-1

PROTECTAB EC-1 is a complete film coating premix based on sodium poly mannuronate (sodium alginate). Sodium Alginate has been long in use as a stable excipient and also as a safe food product. Protectab uses Sodium alginate for its excellent film forming properties.

Advantages of PROTECTAB EC-1:

HIGH SPEED AQUEOUS COATING SYSTEM:

The unique formulation of PROTECTAB EC-1 series ensures that drying is rapid, when done at the right atomizing pressure, thereby making time consumption almost equivalent to organic coating. PROTECTAB EC-1 coatings are almost twice as fast as conventional Aqueous Film Coating.

EXTREMELY EASY TO USE:

Sticking and peeling-off have been almost eliminated. Efficient formulation of PROTECTAB EC-1 ensures quick drying and excellent adhesion to core tablets. The colour holding properties of the formulation reduces mottling during coating. All these qualities make coating with PROTECTAB EC-1 extremely easy and convenient.

ECONOMIC AND SAFE:

Rapid development of coating and reduced process time makes coating with PROTECTAB EC-1 economical. Also, since only water is used as a solvent, costly and hazardous organic solvents are avoided.

Where PROTECTAB EC-1 can be used?

The following are the major advantages for PROTECTAB EC-1:

Rapid Drying: Drying rate is almost twice as fast as any HPMC based aqueous coating process. Therefore, coating can be completed in a short time with excellent results.

Since PROTECTAB EC-1 dries easily, heavy air flow and/or high temperatures are not needed for drying. Also pre-heating of core tablets is not required. Therefore, even temperature sensitive products can be coated using PROTECTAB EC-1 as throughout the process the bed temperature remains in and around 35˚C.

PROTECTAB EC-1 shows good colour holding property and gives good product stability.

So for almost all tablets, with swelling and disintegrating properties, we recommend the use of PROTECTAB EC-1 for film Coating.

PROTECTAB HP-1

PROTECTAB HP-1 is a complete film coating premix based on Hydroxy Propyl Methyl Cellulose. Hydroxy Propyl Methyl Cellulose has been long in use as a conventional film coating material. The PROTECTAB HP-1 series is available as Pure Aqueous Solvent Based System, Organic Solvent Based System and also Hydro Alcoholic solvent Based System.

Advantages of the PROTECTAB HP-1:

STABILITY: PROTECTAB HP-1 series has been developed painstakingly in our R&D to give you good physical and chemical stability throughout the life of your product.

EASY TO RECONSTITUTE: PROTECTAB HP-1 is easily re-constitutable and is compatible to short term exposure to high shear systems like Colloid Mill. Low foam formation avoids loss of material and increases handling convenience.

EXTREMELY EASY TO USE: Sticking and peeling off have been almost eliminated. Efficient formulation of PROTECTAB HP-1 series ensures quick drying and excellent adhesion to core tablets. Good colour holding property of the formulation reduces mottling.

Also, the coating solution viscosity is set so as to give a relatively stable suspension throughout the coating process, at the same time ensuring easy redispersion of the sedimented particles.

All these qualities make coating with PROTECTAB HP-1 easy, convenient, and reproducible.

Where PROTECTAB HP-1 can be used?

PROTECTAB HP-1 is based on HPMC as the basic film former.

PROTECTAB HP-1 gives an easily soluble film in the entire pH range of the gastro-intestinal tract.

PROTECTAB HP-1 is recommended in the following cases:

  • Where tablets do not swell and disintegrate but dissolves and disintegrates. In the above case, good solubility of PROTECTAB HP-1 ensures that there is no major change to core tablet disintegration properties.
  • Where higher percentage of coating is required. For e.g., for slightly Hygroscopic tablets where higher weight gain on coating will prove beneficial (say 3 to 4%) PROTECTAB HP-1 can be used. Very low water vapour transmission rate with increased protection due to greater thickness of the protective film will ensure increased protection against moisture. Good solubility of the film ensures that the tablet does not fail in disintegration and dissolution properties even when 3 to 4% coating is given.

PROTECTAB MB-1

PROTECTAB MB-1 is a complete film coating premix based on a judicial mixture of Ethyl Cellulose and Hydroxy Propyl Methyl Cellulose. PROTECTAB MB-1 is to be reconstituted in Iso propyl alcohol and methylene chloride.

Advantages of the PROTECTAB MB-1:

STABILITY : PROTECTAB MB-1 series has been developed painstakingly in our R&D to give you good physical and chemical stability through out the life of your product. Compared to conventional film coatings PROTECTAB MB-1 shows increased resistance to water vapour transmission due to judicial combination of Ethyl cellulose and Hydroxy Propyl Methyl Cellulose with suitable plasticizers in the formulation.

EASY TO RECONSTITUTE : PROTECTAB MB-1 can be reconstituted easily. Low foam formation avoids loss of material and increases handling convenience.

EXTREMELY EASY TO USE: Sticking and peeling off have been almost eliminated. Efficient formulation of PROTECTAB MB-1 ensures quick drying and excellent adhesion to core tablets. Good colour holding property of the formulation reduces mottling. Also the coating solution viscosity is set so as to give a relatively stable suspension throughout the coating process, at the same time ensuring easy redispersion of the sedimented particles.

All these Qualities make coating with PROTECTAB MB-1 easy, convenient, and reproducible.

Where PROTECTAB MB-1 can be used?

PROTECTAB MB-1 is based on a judicial mixture of Ethyl Cellulose and HPMC as the basic film former. PROTECTAB MB-1 gives a permeable film in the entire PH range of the gastro intestinal tract.

PROTECTAB MB-1 is recommended in the following cases:

  • In products that are hygroscopic and increased resistance to atmospheric moisture is desired.
  • As a seal coat before applying additional film coating by organic solvent method or aqueous method.
 
Back to top
BHARAT COATS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.